Tangit All Pressure PVC Glue (Blue, 475ml): Pro Guide
By Maintenance Depot Plumbing Team · Last reviewed
Quick answer
Tangit All Pressure PVC Glue (blue, 475ml) bonds PVC pipe and fittings in pressure systems. Cut square, deburr, clean, glue both surfaces, join immediately and let it cure before pressurising.
Tangit is a well-known name among plumbers. Tangit All Pressure PVC Glue (Blue, 475ml) is made for joining PVC pipe and fittings in pressure systems.
Specs at a glance
| Spec | Detail |
|---|---|
| Product | PVC glue |
| Brand / name | Tangit All Pressure |
| Size | 475ml |
| Colour | Blue |
| For | PVC pressure pipe and fittings |
Where to use it
- Water supply lines in homes and buildings
- Tank and cistern connections
- Irrigation mains
- Any PVC system that runs under pressure
How to make a strong joint
- Cut the pipe square with a pipe cutter or fine saw.
- Deburr the cut edge inside and out.
- Dry-fit to check the fit and mark depth.
- Clean the pipe end and the fitting socket.
- Apply glue evenly to the pipe and the socket, using the applicator.
- Join immediately and hold for a few seconds without twisting afterwards.
- Wipe off excess glue.
- Cure before pressurising; check the label for times by pipe size.
Tips
- Close the lid immediately after use. The glue thickens quickly when exposed to air.
- Don't use glue that has turned jelly-like.
- Allow longer cure times for larger pipes and higher pressures.
Safety
Use with good ventilation and away from flames.
For larger jobs, see Tangit Professional-Grade UPVC Glue 950ml.
Frequently asked questions
Should I twist the joint after it is pushed together?
Join immediately and hold; avoid twisting once the joint has set.
Why has my glue gone thick?
It was exposed to air. Close the lid right after use.
How long before pressure testing?
Follow the label cure times for your pipe size and pressure.
Buy Tangit All Pressure PVC Glue Blue 475ml at Maintenance Depot