EZ-FLO 2" PVC Ball Valve (#20121): Specs & Install Guide
By Maintenance Depot Plumbing Team · Last reviewed
Quick answer
The EZ-FLO #20121 is a one-piece 2" PVC ball valve with quarter-turn operation, Schedule 40 construction, EPDM seats and a 150 PSI working pressure at 75°F.
For 2" water lines, you need a shut-off valve that's strong and simple. The EZ-FLO 2" PVC ball valve (#20121) delivers quarter-turn control with a durable one-piece body.
Specs at a glance
| Spec | Detail |
|---|---|
| Product | PVC ball valve |
| Size | 2" |
| Brand / model | EZ-FLO #20121 |
| Operation | 1/4 turn |
| Standard | Schedule 40 |
| Working pressure | 150 PSI at 75°F |
| Seats / O-ring | EPDM |
| Body | One-piece |
Why a one-piece body?
With no body joints, there are fewer places for a leak to start. One-piece valves are a dependable choice for permanent installations.
Typical applications
- Main lines from tanks and cisterns
- Pump suction and discharge lines
- Irrigation and farm water systems
- Pool and commercial plumbing
Installation steps
- Cut and deburr the pipe ends.
- Clean and prime the pipe and valve sockets.
- Cement the valve in the open position.
- Let the cement cure fully before pressurising the line.
Tip
Install a 2" PVC union next to the valve. Then, if the valve ever needs replacing, you can remove it without cutting pipe.
Maintenance Depot also carries the PVC ball valve 2" (PBV02) and the 1-1/2" EZ-FLO ball valve.
Frequently asked questions
What is the benefit of a one-piece valve?
With no body joints, there are fewer places for leaks to start.
Can a one-piece valve be repaired?
Generally no. If it fails, it is replaced, which is why fitting a union next to it helps.
Where should I install a 2" valve?
On tank outlets, pump lines, irrigation mains and main supply lines.