PVC Ball Valve 2" (PBV02): Reliable Main-Line Shut-Off
By Maintenance Depot Plumbing Team · Last reviewed
Quick answer
The PBV02 is a 2" PVC ball valve with quarter-turn operation, Schedule 40 construction, EPDM seats and a 150 PSI working pressure at 75°F, ideal as a main-line shut-off.
Every main water line should have an easy-to-reach shut-off. The PVC ball valve 2" (PBV02) gives you quarter-turn control for larger lines.
Specs at a glance
| Spec | Detail |
|---|---|
| Product | PVC ball valve |
| Model | PBV02 |
| Size | 2" |
| Operation | 1/4 turn |
| Standard | Schedule 40 |
| Working pressure | 150 PSI at 75°F |
| Seats | EPDM |
Where to install
- On tank outlets and cistern lines
- Before and after pumps
- On irrigation mains and farm lines
- To isolate sections of a building for maintenance
Installation steps
- Cut and deburr the pipe ends.
- Clean and cement the pipe into the valve sockets, with the valve open while you work.
- Support the valve so the pipe doesn't carry its weight.
- Allow full cure time before pressurising.
Tips
- Place valves where you can reach them quickly in an emergency.
- Label which valve controls which area.
- Exercise the valve (open and close it) a few times a year so it doesn't seize.
Compare options
Maintenance Depot also carries the EZ-FLO 2" PVC ball valve (#20121) with a one-piece body. Both are rated to 150 PSI, so ask our team which suits your system.
Frequently asked questions
How often should I operate a shut-off valve?
A few times a year, so it does not seize.
Should I label my valves?
Yes, label which area each valve controls for emergencies.
PBV02 or EZ-FLO #20121?
Both are 2" and rated to 150 PSI. Ask our team which suits your system.